User Manual

ManualsBrandsSequel Technologies ManualsElectronicsMotion Detector, PIR, Wireless

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC

360 Herndon Parkway Model: STWS-PIR

Suite 1400 Standard: FCC 15.231

FCC ID: V4X-WTMX01 Herndon, VA 20170

http://www.rheintech.com

Report #: 2008039

Page 20 of 29

Appendix G: Manual

Please see the following pages.

Summary of content (5 pages)

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix G: Client: Model: Standard: FCC ID: Report #: Sequel Technologies, LLC STWS-PIR FCC 15.231 V4X-WTMX01 2008039 Manual Please see the following pages.
PAGE 2
PIR Motion Sensor (PIR) Installation Instructions Sequel Technologies, LLC General Description Installation The PIR Motion Sensor is a supervised, wireless sensor designed to detect movement. The sensor achieves consistent detection and superior false alarm immunity through PYROFLEX™ infrared detection. The PIR can handle a variety of applications, including coverage for hallways and corridors, large rooms, and pet immunity.
PAGE 3
Installing the PIR 1. Remove the cover by inserting a screwdriver into the slot at the bottom of the sensor. Push inward on cover latch and remove the cover. 2. Push outward on circuit board latch and gently lift circuit board and remove. 5. Bracket mounting (optional): Remove the knock-out to open a hole in the center of the square recess at the rear of the sensor base. Use screws to mount bracket in desired location. Use screw to mount sensor base onto the bracket. 6.
PAGE 4
Enrolling the Sensor To enroll the PIR into system memory: 1. Enter program mode (NEXT + NEXT + NEXT + + Installer PIN) 2. The keypad will display “Devices Available.” Select . The display shows “Auto Enroll On.” 3. To enroll the PIR, remove the sensor cover. 4. Upon enrollment, the keypad emits one beep and the display shows the zone number and sensor ID. Replace the sensor cover. 5. Continue enrolling additional sensors if desired. When finished, press to exit. 6.
PAGE 5
Specifications Power • Battery: 3 VDC, CR123A lithium battery (average battery life is 3-5 years) Motion Detection • Range: ◦ Up to 40 feet in sensor-facing direction ◦ Up to 40 feet at 45° angle from sensor direction • Sensitivity: 2-event/2.5 C or 3-event/3.0 C • Optical Pattern: Long (44), Mid (36), Short (18) • IR Sensor: PYROFLEX™, Dual elements • Events Detection: HighBar™ processing engine Wireless • Transmitting frequency: 319.