Installation Guide

ManualsBrandsSequentia ManualsBuilding Supplies2.166-ft x 8-ft Corrugated White Fiberglass Roof Panel

A global leading provider of resilient wall and ceiling coverings. Kemlite® was established in 1954 and the company changed names to Crane Composites in 2007. Crane

Composites is headquartered in Channahon, IL and all our products are manufactured in the United States. We work with hundreds of distributors, ensuring our products are

easily accessible and readily available to our customers.

The following are trademarks of Crane Composites, Inc. or a related company: Sequentia, Super 600, WeatherGlaze, Kemlite, Kemply, Surfaseal, Silhouette Trims and Varietex

2517 | REV. 4 | 05.2020 (8848)

cranecomposites.com | 1.800.435.0080 | sales@cranecomposites.com

9. Determine necessary cuts for horizontal cross strips.

NOTE: Cut crown profiles to match-up with vertical edge

strips. Test-fit the first cut strip, using a short piece of

corrugated panel. When satisfied, use the test piece as a

pattern for marking and cutting additional horizontal strips.

Cut strips 1/4” shorter than needed to allow shifting.

Tack horizontal strips to all horizontal framing members,

using 1” galvanized nails in recesses between crowns.

Continue checking alignment of strips, using a small strip

of corrugated panel.

10. For easier, neater finishing, paint or stain greenhouse

framing before installing corrugated panels.

11. Follow corrugated panel installation instructions for

fastening panels to framing. Install vertical wall panels first.

Install roof panels last.

12. Install corrugated ridge flashing: use approved mastic or

caulk to bond flashing to fiberglass panels. Flashing can be further secured using panel nails or screws and sealer.

13. Install gable vents after corrugated panels have been installed. Use layered foam enclosures at top and bottom of vents to fill voids.

14. Install assembled custom door or ready-made door.

FOR QUESTIONS OR CONCERNS, PLEASE CONTACT:

Crane Composites Customer Service Department

1.800.435.0080 | 1.815.467.8600

Note: Install panels on side walls first.

Install roof panels last.

Prevailing Wind Direction