Use & Care Guide

TTEECCHHNNIICCAALL BBUULLLLEETTIINN
2501
rev. 13
July 2005
T
TABLE TWO: DESIGN TABLE
Typical Values
Test Method
Property
FTST
0.09" (2.3 mm)
Tensile Strength
5,000 psi
(34 MPa)
ASTM D790
Tensile Modulus
350,000 psi
(2413 MPa)
ASTM D790
Flexural Strength
10,000 psi
(69 MPa)
ASTM D638
Flexural Modulus
350,000 psi
(2413 MPa)
ASTM D638
Impact Strength (IZOD)
3.3 ft•lbs/in
(0.18 J/mm)
ASTM D256
Barcol Hardness 20-30 ASTM D2583
Coefficient of Linear Thermal Expansion
2.25 x 10
-5
in/in•°F
(41µm/m•°C)
ASTM D696
Water Absorption % <0.75% in 24 hrs @77°F (25°C) ASTM D570
Product Code Nominal Thickness Color Finish Fire Rating Size
FTST
0.09"
(2.3 mm)
(77096, 77166,
77169, 77133)
1130 White
1114 Almond
1207 Gray
1198 Ivory
1258 Silver
1726 Beige
1201 Black
Embossed
Class C
per ASTM E-84
≤ 200 flame spread
≤ 450 smoke developed
4' x 8' (1.2 m x 2.4 m)
4' x 9' (1.2 m x 2.7 m)
4' x 10' (1.2 m x 3.0 m)
4' x 12' (1.2 m x 3.7 m)
TABLE ONE: PHYSICAL PROPERTIES
FTST
STRUCTOGLAS EMBOSSED WALL PANEL
CLASS C FIRE RATING PER
ASTM E-84
Product Description:
Structoglas Class C fiberglass reinforced plastic (frp) wall
panels are durable, semi-rigid, and will not mold, mildew,
rot, rust, corrode, stain, dent, peel, or splinter. Panels
exhibit a high strength-to-weight ratio with
expansion/contraction values similar to aluminum.
Purpose:
Structoglas panels are recommended for use on interior
celings requiring a Class C finish for agricultural,
commercial and industrial buildings where sanitation,
durability, aesthetics and safety are critical.