User Manual

Global Parameters
To edit the Global parameters, press the GLOBAL switch and Global page 1 is
displayed. The PARAM
1 knob changes the parameter on the upper LCD line,
and the PARAM
2 knob changes the lower parameter. The +/YES and -/NO
switches select the other pages.
Note: If you hold the -/N
O switch while you hit the +/YES switch, it will
jump to the last page. Similarly, if you hold the +/Y
ES switch when you
hit the -/N
O switch, it will jump to the first page.
Page 1:
Transpose: xx
Fine Tune: xx
Transpose: -12…+12 – Master Transpose control, 0 is centered. Steps in
semitones.
Fine Tune: -50…+50 – Master Fine Tune control; 0 centered. Steps in cents (50
cents = 1/2 semitone).
Page 2:
MIDI Channel: xx
Poly Chain: xxx
MIDI Channel: ALL, 1…16 – Selects which MIDI channel to send and receive
data, 1 to 16. All receives on all 16 channels.
Poly Chain: Off, Out 4, Out 8, In – Use this to increase polyphony by
intelligently processing the keys hit and passing MIDI data through to the Poly
Chain MIDI out jack, where it can be routed to a second Prophet '08 or one or
two Tetras. See Using Poly Chain on page 33 for details.
Note: If Poly Chain is set to Off, the Poly Chain MIDI out jack simply
duplicates the MIDI out jack.
7