User Manual

Rack Mounting the Module

The Prophet '08 module includes rack ears for mounting the module in a

standard, 19" equipment rack. The module itself is 4U (4 rack spaces) high. The

inputs and outputs are recessed, but it may be necessary to use angled plugs for

audio and MIDI to prevent the plugs and cables from interfering with a fifth

space above the module.

To rack mount the module:

1. Remove the six 1" 8-32 screws from the two wood end panels. Keep

the screws and end panels in a safe place, to revert back to the tabletop

configuration.

2. Using the six supplied 3/8" 8-32 flat-head screws, attach the rack ears

to each side of the module. Please note: It is very important to use the

shorter screws to attach the rack ears. Longer screws may damage the

internal components.

3. Connect the necessary cables (power, MIDI, audio, etc.).

4. Mount the module in the rack.