User Manual

31
destination will individually move each voice from its static position as set by
P
AN SPREAD.
Push It Mode: Normal, Toggle—When set to Normal, PUSH IT responds like a
key: press it and a note plays, release it and the note ends. But when set to
Toggle, P
USH IT turns the note on with one press and off with a second press.
This is handy for making a note drone or for latching a gated sequence on.
Push It Note: C0…C10—Sets the note that plays when PUSH IT is pressed.
Push It Velocity: 0…127—Sets the MIDI note-on velocity.
Unison On/Off—When on, Mopho x4 behaves like a monophonic synthesizer
and only one note will play at a time. See also “Unison Mode,” below.
Unison Mode—Sets how voices are allocated and tuned when unison is on.
Display
Mode
1 Voice
Classic, two oscillator, monophonic mode
All Voices
All four voices in unison
AllDetune1-3
All four voices in unison with increasing
levels of detuning among the voices