QUICK-START GUIDE RELOOP RP-8000
Installation And Setup The Reloop RP-8000 is a class compliant USB plug and play device and requires no further driver installation. NOTE: The Reloop RP-8000 is an additional controller that will only work in addition to supported Serato DJ hardware. Click here to see a list of supported Serato DJ hardware. • • • • Download and install the latest version of Serato DJ from http://serato.com/ dj/downloads Connect your supported Serato DJ hardware to a USB port.
Controller 1 START/STOP 2 15 14 3 13 12 11 10 4 5 START/STOP 6 7 8 9
# Reloop RP-8000 Control Function 1 START/STOP Press to Start/Stop the platter 2 TRAX/BROWSER Turn to browse through currently focused area (library/crates/open panels). Click once to load track to deck. Hold down to toggle focus between Library and Crates. Double Tap for instant doubles. 3 PERFORMANCE PADS See performance pads section for more information on this section.
Performance Pads Using the Tool Tips The performance pads have 4 different basic modes you can select. The modes are; Hot Cue, Auto Loops, Sampler and User. Click on the icon to enable Tool Tips. This is located in between the MIDI and setup button in the top right hand corner of the screen. Tool Tips provide a handy way to learn the various features of Serato DJ. • • • • HOT CUE Mode: Press “CUE” to activate this mode. When pressing performance pads 1-8 you can add and trigger up to 8 Cue Points.
