QUICK-START GUIDE RELOOP TERMINAL MIX 8
Installation and Setup The Reloop Terminal Mix 8 is a class compliant USB plug and play device for Mac, however requires drivers for Windows. You will find these on the installation cd provided within your Reloop Terminal Mix 8. 1 2 3 4 5 6 7 8 9 10 11 12 13 NOTE: Please ensure you have the latest available drivers AND firmware updates, which may be required in order to be compatible with Serato DJ. Please go to http://serato.com/dj/support 1. 2. 3.
Controller 1 2 3 4 5 6 7 8 910111213 14 PERFORMANCE MODE DUAL 15 16 17 PERFORMANCE MODE MODE DUAL MODE 39 18 19 38 37 20 36 21 35 34 33 32 31 30 29 28 27 26 25 24 23 22
NOTE: The SHIFT button is used with other buttons that have shift modifier functions. # Reloop Terminal Mix 8 Control Function Shift Function 1 DECK FX ASSIGN Assigns FX to selected Deck SHIFT+RANGE will change the available pitch range.
# Reloop Terminal Mix 8 Control Function 20 LOAD Load track to selected deck 21 POWER Shows unit is being powered by AC 22 DECK 4 Select Active Deck 2/4 (Right Deck) 23 HEAPHONE CUE Cue selected channel in headphones 24 PREPARE Sends highlighted track in library to the PREPARE Crate 25 CROSSFADER Crossfades audio between active decks 26 LED METER LED representation of Master Output 27 BACK Toggles between the Crate list and Library 28 CHANNEL FADERS Adjust channel volume 29 DE
Performance Pads • Holding SHIFT and pressing pads 1-8 will delete the Cue Points. LOOP Mode: Pressing LOOP once for the first mode, is Manual Looping. Pressing LOOP twice for the second mode enables Loop Roll Mode. Pressing pads 1-8 will enable a loop roll for the time the pad is pressed, the loop will exit once the pad is released. See the looping table for more infomation. The SMPL, CUE and LOOP modes are able to be activated together in Dual Mode.
Looping You have up to 8 loops per track in Serato DJ, and the choice between either manual or auto loops. You can choose whether you have 4 loops (and 4 cuepoints) showing on screen, or 8 loops. To switch between Manual and Auto looping, click (Manual) or (Auto) onscreen. You can also half or double the loop length in either manual or auto modes.
DJ-FX Serato Video The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab Screen_ to open the FX panel. Select either 1, 2, 3, 4 or M to assign the selected effect bank to a deck or Master Output. To activate an effect, click the ON button on your FX UNIT in the software, or the FX1 ON button on your controller. You can adjust effect parameters by using either software controls, or the FX1/FX2/FX3 knobs/buttons on the controller. There are two available modes in the DJ-FX.
Using the Tool Tips Click on the icon to enable Tool Tips. This is located in between the MIDI and setup button in the top right hand corner of the screen. Tool Tips provide a handy way to learn the various features of Serato DJ. Move the mouse over a section of the screen to bring up a context sensitive tool tip. Holding the mouse over the button with Tool Tips turned on will show you a list of all keyboard shortcuts. For more information about how to use Serato DJ, please go to our website www.serato.
