User's Manual

Fixed IP Address
This option is recommended. If this option is used, the IP address or
the NAS will never change. You need to enter the following data.
• IP address - The utility will suggest a unused IP address within
the address range used on your LAN. If you wish, you can
change this, but you must ensure the address is unused.
• Network Mask - This must match the value used by PCs on your
LAN.
• Gateway - This must match the value used by PCs on your LAN.
5. Click "Next" to continue. The following screen will then be displayed:
The following data is required.
Server Name:
The Default Name is shown. Change this if you wish.
Workgroup
Name:
Normally, this name should match the Workgroup name used by PCs on your
LAN.
Page 17