User's Manual

LAN Screen
This screen allows you to set the IP Address and related information required for TCP/IP networks.
• Wireless Access Point:
If you are using this device as a Wireless Access Point,
IP Address = The IP Address of the NAS.
DHCP server = The IP Address range that the NAS will serve out to the client that is wirelessly
connected.
DNS Server = If the NAS is connected to a device that has Internet access, these fields are appli-
cable and will be automatically populated via the Internet device it is connected to.
• Wireless Client:
If you are using this device as a Wireless Client,
IP Address = The IP Address that the NAS will receive or can be statically assigned to match the
network of the Router or Gateway that it is connected to.
DHCP Server = This function can be used in the event that the NAS is connected to a network that
denies full access, in which, accessing only the NAS, is still achievable, if this function is set.
DNS Server = If the NAS is connected to a device that has Internet access, these fields are appli-
cable and will be automatically populated via the Internet device it is connected to.
Page 47