User's Manual

Language Support
Select the language used by computers on your LAN. If multiple
languages are used, select the most common.
Time Zone
Select the correct time zone for your location.
Local Date
Enter the local date. The NAS Server will set it own calendar
according to the date you provide.
Local Time
Enter the local time at your location. The NAS Server will set its
own clock according to the time you provide. Remember that this
is not sent to the Server until you click "OK".
NTP
Enable NTP
If enabled, the NAS Server will synchronize its clock with a NTP
(Network Time Protocol) Server.
NTP Server
Enter the domain name or IP address of the NTP server you wish
to use. The NTP server can be a public server (on the Internet) or
a local server (on your own network).
NTP Status
This shows the status of the NTP update procedure.
Synchronize ...
Select how often you want the NAS Server to synchronize its
clock with the specified NTP server. You can also specify the
time of the next synchronization. This allows you to specify that
the synchronization should be performed (for example) at 11.00
pm each day.
Sync Now
Use this button to synchronize with the NTP server immediately.
Page 52