User Manual

9
Figure 5: Camera List Screen
• Select the desired Camera from the list on the left. The current settings for the selected
Camera will be displayed in the table on the right.
• Click Next to continue.
3. If the Administrator ID and Password have been set, you will be prompted to enter them,
as shown below.
• If using the default values, enter administrator for the name, and leave the
password blank.
• Otherwise, enter the Administrator ID and Password set on the User screen.
Figure 6: Password Dialog
The Administrator ID and password can be set on the "User"
screen of the Web interface. The Web interface can be
accessed via the "Web UI" button on the final screen of the
Wizard.
4. On the following TCP/IP screen, shown below, choose Fixed IP or Dynamic IP.