User Manual

20
The "Port" for the Port Forwarding / Virtual Server entry
above is the "Second Port" number specified on the Network
screen of the Wireless/Ethernet Network Camera.
Viewing via the Internet
Clients (viewers) will also need a broadband connection; dial-up connections are NOT
recommended.
Using the Windows Viewing/Recording Utility
If using the Windows Viewing/Recording Utility, the details of the Wireless/Ethernet Network
Camera must be entered on the Internet tab of the Add Camera screen.
Figure 19: Add Camera from Internet
You can then select the camera in the Cameras list on the main screen, and click View to
establish a connection and view live video.
See Chapter 5 - Viewing and Recording for full details on using the Windows
Viewing/Recording utility.
Using your Web Browser
If using your Web browser, you need to know the address of the camera (either the Internet IP
address or the Domain name) and the correct port number.
Enter the address of the Wireless/Ethernet Network Camera, and its port number, in the
Address (or Location) field of your Browser.
Example - IP address:
HTTP://203.70.212.52:1024
Where the Router/Gateway's Internet IP address is 203.70.212.52 and the "Second Port"
number on the Wireless/Ethernet Network Camera is 1024.
Example - Domain Name:
HTTP://mycamera.dyndns.tv:1024
Where the Router/Gateway's Domain name is mycamera.dyndns.tv and the "Second
Port" number on the Wireless/Ethernet Network Camera is 1024.
See Chapter 5 -Viewing and Recording for further details of viewing Video using either the
Windows Viewing/Recording utility or your Web Browser.