User Manual

21
Motion Detection/E-mail Alerts
The Motion Detection feature will capture a short video and send it to your E-mail address
when motion is detected.
The Wireless/Ethernet Network Camera will compare consecutive frames to detect changes
caused by the movement of large objects.
But the motion detector can also be triggered by:
• Sudden changes in the level of available light
• Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in locations where there
is good steady illumination, and the camera is mounted securely. It cannot be used outdoors
due to the sensitivity of the CMOS sensor.
To Use Motion Detection/E-mail Alert
Using the Web-based interface on the Wireless/Ethernet Network Camera, select the E-mail
screen, then configure this screen as described below.
Figure 20: Motion Detection/E-mail Alert
1. Check the box Send E-mail Alert when Motion Detected.