User Manual
22
2. Enter at least one (1) E-mail address
3. In the Show “From” as field, enter the E-mail address you wish to display as the sender,
when you receive the mail. This should be a genuine E-mail address, otherwise spam
filters may block your mail.
4. Enter a suitable Subject for the E-mail.
5. Enter the address of the SMTP Server in the Outgoing Mail SMTP Server field.
If the SMTP Server requires a "login" in order to send mail, check the box My Mail Server
Requires Authentication and enter your login name and password.
6. In the E-mail Video section, select the desired options
• Delay between E-mails is used to prevent your E-mail inbox being flooded with E-
mails. Select the desired time interval.
• Motion Sensitivity determines how readily the motion detection sensor is activated.
You can select the sensitivity, and also select the areas of the image to be examined.
Note: You must select at least one area. If you don’t, the motion detection will never
be triggered, and no E-mail alerts will ever be sent.
7. In the E-mail Video section, select the desired options
• Set Include Video to “Yes” if you want to include a video with the E-mail.
• Set Video Length as desired. Note that if using higher resolution and lower
compression, even a short video file could be quite large.
8. Save (Apply) your changes.