User Manual

Chapter 4

Web-based Management

This Chapter provides Setup details of the Wireless/Ethernet Network

Camera’s Web-based Interface. This Chapter is for Administrators only.

Introduction

The Wireless/Ethernet Network Camera can be configured using your Web Browser. The

Wireless/Ethernet Network Camera must have an IP address which is compatible with your PC.

The recommended method to ensure this is to use the supplied Windows-based Wizard, as

described in the previous chapter.

Connecting to Wireless/Ethernet Network Camera

• If you have run the Windows-based setup Wizard, the final screen provided a button Web

UI. Clicking this button will immediately connect to the Wireless/Ethernet Network

Camera, using your Web Browser.

• If using only your Web Browser, use the following procedure to establish a connection

from your PC to the Wireless/Ethernet Network Camera:

• Once connected, you can add the Wireless/Ethernet Network Camera to your Browser's

Favorites or Bookmarks.

Connecting using your Web Browser

1. Start your WEB browser.

2. In the Address box, enter "HTTP://" and the IP Address of the Wireless/Ethernet Network

Camera, as in this example, which uses the Wireless/Ethernet Network Camera's default IP

Address:

HTTP://192.168.0.99

3. If the Administrator ID and Password have been assigned, you will then be prompted for a

username and password. Enter the name and password you assigned.