User Manual

37
Show "From" as Enter the E-mail address to be shown in the "From" field when the E-
mail is received.
Subject Enter the desired text to be shown as the "Subject" for the E-Mail when
it is received. Subject can not exceed 48 alphanumeric characters.
Outgoing Mail
SMTP Server
Enter the address of the SMTP (Simple Mail Transport Protocol)
Server to be used to send E-Mail.
If the SMTP Server requires a "login" in order to send mail, check the
box My Mail Server Requires Authentication and enter your login
name and password for the SMTP Server. (This is usually the same as
the POP3 Server used to receive E-mail.)
Delay between
E-mails
Use this to ensure your E-mail inbox is not flooded with E-mail alerts.
Select the desired time delay between E-mail alerts.
Motion Detection
• Sensitivity
Select the desired option to suit your environment. If covering a
large area, you usually need higher sensitivity, since a moving
object will take only a small portion of the image.
• Areas of the image to be examined
Use the checkboxes to determine which areas of the image are
examined for motion. You can also use the "Select All" and
"Select None" buttons if desired.
E-mail Video
Include Video
Set to "yes" to include a short video in your E-mail alert.
Video Length Select the desired length. The size of the file depends on this setting,
and also the Video size and degree of compression.