User Manual

Upgrade Firmware Screen

This screen is displayed when you click the Upgrade Firmware button on the Status screen.

Figure 32: Upgrade Firmware Screen

This screen allows you upgrade the Firmware (software) in your Wireless/Ethernet Network

Camera. Before using this screen, your must download the upgrade file to your PC.

Then follow this procedure:

1. Click the Browse button, and locate the upgrade file.

2. Select this file, and click OK. The filename will then appear in the Upgrade File field.

3. Click the Start Upgrade button to transfer the file to the Wireless/Ethernet Network

Camera and start the upgrade procedure.

Note:

• The upgrade may take several minutes.

• When the upgrade is completed, the Wireless/Ethernet Network Camera will restart. This

will cause any existing connections to be terminated. Any users viewing or recording the

video will see this as an error.