User Manual

41
Chapter 5
Viewing & Recording
This Chapter describes how to view and record the live video stream
generated by the Wireless/Ethernet Network Camera.
Overview
The recommended method to view video is to use the supplied Windows Viewing/Recording
utility.
Installation
1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run Netcam_Setup.exe in the root folder. You will see the Welcome screen
shown below.
Figure 33: Welcome Screen
2. Click the Client Utility button to start the installation of the Viewing/Recording Utility.
3. Follow the prompts to complete the installation.
5