User Manual

44
Adding Cameras to the Camera List
To add a camera to the Camera List, click the Add Camera button on the main screen. You will
see a screen like the example below.
• The Cameras on LAN panel, on the left, displays all Wireless/Ethernet Network Camera
found on your LAN. This list can be updated by clicking the Refresh button.
• The Camera Data panel, on the right, displays the data for the selected camera.
Figure 36: Add Camera from LAN
To add a camera to the Camera List on the main screen:
1. Select a camera in the list on the left.
2. Check that the Camera Data shown on the right is correct. See below for details.
3. Click the Add button. The camera will now appear in the Camera List on the main screen.
Camera Data - LAN
Device Name This is the default name for the Wireless/Ethernet Network Camera, and
cannot be changed.
Description This displays the description entered by the Wireless/Ethernet Network
Camera Administrator.
Address
The current IP address of the Wireless/Ethernet Network Camera.
Port Number This will normally display "80". Only change this if requested to do so
by the Wireless/Ethernet Network Camera Administrator.
Login The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
• If the Administrator has not enabled this option, the Login fields can
be left blank.
• Otherwise, you must enter the username and password allocated to
your by Administrator.
You can add the same Camera twice, once for the LAN (using
the LAN IP address), and again for the Internet (using the
Internet IP address). This will allow viewing the camera whether
you are on the same LAN as the camera or in a remote location.