User Manual

45
Adding Cameras on the Internet
If the Wireless/Ethernet Network Camera you wish to add is not on your LAN, but is available
via the Internet, click the Internet tab. You will see a screen like the example below.
Figure 37: Add Camera from Internet
To add a camera to the Camera List on the main screen:
1. Enter the Camera Data on the panel on the right. See below for details.
2. Click the Test button to check that a connection and login can be performed successfully.
3. Click the Add button. The camera will now appear in the Camera List on the main screen.
Camera Data - Internet
Device Name This is the default name for the Wireless/Ethernet Network Camera, and
cannot be changed.
This field will be displayed automatically once a connection to the
Wireless/Ethernet Network Camera has been established.
Description This displays the description entered by the Wireless/Ethernet Network
Camera Administrator.
This field will be displayed automatically once a connection to the
Wireless/Ethernet Network Camera has been established.
Address Enter the Domain Name or Internet IP address of the desired
Wireless/Ethernet Network Camera.
Port Number Enter the port number used by the Wireless/Ethernet Network Camera.
The Wireless/Ethernet Network Camera Administrator can advise you
of the port to use. The default value is 1024.
Login The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
• If the Administrator has not enabled this option, the Login fields can
be left blank.
• Otherwise, you must enter the username and password allocated to
your by Administrator.