User Manual

55
Viewing via the Internet
If the LAN with the Wireless/Ethernet Network Camera is connected to the Internet, and
configured correctly, you can connect to the Wireless/Ethernet Network Camera via the
Internet.
See Making Video available from the Internet in Chapter 3 for details of the required LAN
configuration.
To establish a connection from your PC to the Wireless/Ethernet Network Camera via the
Internet:
1. Obtain the Internet address and port number of the Wireless/Ethernet Network Camera
from the Administrator.
2. Start your WEB browser.
3. In the Address box, enter the following:
HTTP://Internet_Address:port_number
Example using an IP address:
HTTP://203.70.212.52:1024
Where the Router/Gateway's Internet IP address is 203.70.212.52 and the "Second
Port" number on the Wireless/Ethernet Network Camera is 1024.
Example using a Domain Name:
HTTP://mycamera.dyndns.tv:1024
Where the Router/Gateway's Internet Domain name (using DDNS in this example) is
mycamera.dyndns.tv and the "Second Port" number on the Wireless/Ethernet
Network Camera is 1024.
4. If the Administrator has enabled the user validation feature, you will then be prompted for
a username and password.
Enter the name and password assigned to you by the Wireless/Ethernet Network Camera
administrator.
5. When you connect, the following screen will be displayed.
Figure 49: Home Screen