User Manual

3
• Wired and Wireless Network Support. The Wireless Network Camera supports both
wired and wireless transmission.
• WEP Support. Full WEP support (64/128 Bit) on the Wireless interface is provided.
Physical Details
Figure 2: Wireless/Ethernet Network Camera
Front Panel
Focus Ring Normally, it is not necessary to adjust the focus. The default focus
range is from 1 meter (3 feet) to infinity. If the image is not clear, try
adjusting the focus.
Microphone The built-in microphone is mounted on the front. There is also a
connection for an external microphone on the rear. Connecting an
external microphone will disable the built-in microphone.
Ready LED
On - Power on.
Off - No power.
Blinking - The Ready LED will blink during start up. This will take
15 to 20 seconds.
Active LED
Off - Idle.
Blinking - Wireless/Ethernet Network Camera is providing a live
video stream to at least one viewer.
LAN LED
On - LAN port is connected to a hub or switch.
Off - LAN port is not connected.
Blinking - Data is being transmitted or received via the LAN port.
Wireless LED (Wireless Network Camera only)
On - Wireless interface is active.
Off - Wireless interface is not available.
Blinking - Data is being transferred via the Wireless interface.