User Manual

Chapter 2

Installation

This Chapter covers the physical installation of the Wireless Router.

Requirements

• DSL or Cable modem, and an Internet Access account with an ISP, for shared Internet

access.

• Network cables. Use standard 10/100BaseT CAT5 network (UTP) cables with RJ45 connec-

tors

• TCP/IP network protocol must be installed on all PCs.

• For shared access to the attached printer, the following clients are supported:

• Windows 95/98/ME

• Windows NT 4.0, 2000 or XP

• Unix (LPD printing)

Procedure

Figure 3: Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the Wireless Router.

Ensure both the Wireless Router and the DSL or Cable modem are powered OFF.