User Manual

Wireless Router User Guide

• Source IP Address - The IP Address of the local PC request-

ing the Internet connection.

• Destination - The Internet address which was requested. If

the URL Filter is enabled, this address will be shown as a

URL. Otherwise, the IP address will be displayed.

• Blocked - If the request was blocked by the URL Filter

function, this will display "Yes". Otherwise, it will be blank.

LAN

IP Address The IP Address of the Wireless Router.

Network Mask The Network Mask (Subnet Mask) for the IP Address above.

DHCP Server This shows the status of the DHCP Server function - either "En-

abled" or "Disabled".

For additional information about the PCs on your LAN, and the IP

addresses allocated to them, use the PC Database option on the

Advanced menu.

System

Device Name This displays the current name of the Wireless Router.

Firmware Version The current version of the firmware installed in the Wireless

Router.

"System Data"

Button

Clicking this button will open a Window which lists all system

details and settings.

Printer

Printer Status This indicates the current status of the printer. Possible values

are:

• Idle

• Printing

• Off-line

• Out of paper

"Abort Current Print

Job" Button

Click this button to terminate the current print job. This button

should be used if the current print job is not printing correctly.

Buttons

Connection Details View the details of the current Internet connection. The sub-

screen displayed will depend on the connection method used. See

the following sections for details of each sub-screen.

Access Log View details of outgoing connections to the internet.

System Data Display all system information in a sub-window.

Abort Current

Print Job

Use this to terminate the current print job if is not printing cor-

rectly.

Refresh Screen Update the data displayed on screen.