User Manual

Advanced Configuration

Options

This screen allows advanced users to enter or change a number of settings. For normal opera-

tion, there is no need to use this screen or change any settings. An example Options screen is

shown below.

Figure 42: Options Screen

Data - Options Screen

Backup DNS

IP Address Enter the IP Address of the DNS (Domain Name Servers) here. These

DNS will be used only if the primary DNS is unavailable.

TFTP

Enable Firmware

Upgrade using

TFTP

• If enabled, TFTP (Trivial FTP) can be used to upgrade the firmware

in this device. This is normally not required; a Windows utility is

available for this purpose.

• You must obtain the firmware upgrade file first; instructions for

using TFTP will be available with the upgrade.

UPnP

Enable UPnP

Services

• UPnP (Universal Plug and Play) allows automatic discovery and

configuration of equipment attached to your LAN. UPnP is by

supported by Windows ME, XP, or later.

• If Enabled, this device will be visible via UPnP.

• If Disabled, this device will not be visible via UPnP.

Allow Configura-

tion...

• If checked, then UPnP users can change the configuration.

• If Disabled, UPnP users can only view the configuration.

Allow Internet

access to be

disabled

• If checked, then UPnP users can disable Internet access via this

device.

• If Disabled, UPnP users can NOT disable Internet access via this

device.