User Manual

Wireless Router User Guide
72
Printer Port
Printer Port configuration is only required if using LPD printing under Linux or Unix. Otherwise,
these settings are ignored.
Under LPD, the Wireless Router supports 3 "Logical Printers".
Figure 43: Printer Port Screen
Logical Printers
No (L1, L2, L3) There are 3 Logical Printers (Ports), named L1, L2, and L3.
These names can not be changed, and must be used when select-
ing the logical printer from your Unix system.
Pre-string (HEX) Enter (in HEX) the series of printer commands to be sent to the
attached printer BEFORE each print job.
Post-string (HEX) Enter (in HEX) the series of printer commands to be sent to the
attached printer AFTER each print job.
LF to CR/LF If checked, Unix-style LF (line feed) characters at the end of each
line will be converted to CR/LF (carriage return/line feed) pairs, as
used in MSDOS and Windows.