User's Manual

Table Of Contents

Advanced Configuration

Figure 37: Routing Screen

Data - Routing Screen

RIP

Enable RIP

Check this to enable the RIP (Routing Information Protocol) feature

of the LevelOne 22Mbps Wireless AP Router.

The LevelOne 22Mbps Wireless AP Router supports RIP 1 only.

Static Routing

Table Entries

This list shows all entries in the Routing Table.

• The "Properties" area shows details of the selected item in the

list.

• Change any the properties as required, then click the "Update"

button to save the changes to the selected entry.

Properties

• Destination Network - The network address of the remote LAN

segment. For standard class "C" LANs, the network address is

the first 3 fields of the Destination IP Address. The 4th (last)

field can be left at 0.

• Network Mask - The Network Mask for the remote LAN

segment. For class "C" networks, the default mask is

255.255.255.0

• Gateway IP Address - The IP Address of the Gateway or

Router which the LevelOne 22Mbps Wireless AP Router must

use to communicate with the destination above. (NOT the router

attached to the remote segment.)

• Metric - The number of "hops" (routers) to pass through to

reach the remote LAN segment. The shortest path will be used.

The default value is 1.

Buttons

Save

Save the RIP setting. This has no effect on the Static Routing Table.