User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 LAN Installation
- Chapter 3 Wireless Print Server Configuration
- Chapter 4 Client PC Configuration
- Chapter 5 BiAdmin Management Utility
- Chapter 6 Web-Based Management
- Chapter 7 Special Features
- Chapter 8 Troubleshooting
- Appendix A Specifications
- Appendix B Windows Server Configuration
- Appendix C Unix Systems
- Appendix D NetWare
Page 24
Device List
The left panel displays a list of all 802.11g Wireless Print Servers found on the network. When
a 802.11g Wireless Print Server is selected from the list, its details are displayed in the right
panel.
Note: If the IP address is "Null", please click the Refresh icon to get the value again.
If the desired 802.11g Wireless Print Server is not listed, try the
following:
• Check that the device is installed and ON, then Refresh the list.
• If the 802.11g Wireless Print Server is on another LAN segment, use the InitDevice -
Attached Remote menu option to locate and display the 802.11g Wireless Print Server.
Icons
Device Status
Menu equivalent: Main - Device Status
All of the settings for the current device are displayed in a read-only scrollable list
in the left panel.
You can use the "Save to File" and "Restore to Device" buttons on this screen to
save a copy of the selected device's CONFIG file to your PC, or restore a
previously saved file to the selected 802.11g Wireless Print Server.
Printer Status
Menu equivalent: Main - Printer Status
After selecting this icon, a Detail button will be available to show more
information about the printer.