User's Manual
Table Of Contents
- Chapter 1Introduction
- Chapter 2LAN Installation
- Chapter 3Wireless Print Server Configuration
- Chapter 4Client PC Configuration
- Chapter 5BiAdmin Management Utility
- Chapter 6Web-Based Management
- Chapter 7Special Features
- Chapter 8Troubleshooting
- Appendix ASpecifications
- Appendix BWindows Server Configuration
- Appendix CUnix Systems
- Appendix DNetWare
Page 25
If the selected Print Server has multiple ports, you can select the desired port from
the drop-down list to display the current status of the printer attached to the port.
Possible states are:
• Status - On-line, Off-line, or Out of Paper
• Printing Information - Idle, Printing
If the printer is Bi-directional, and is not busy, the Configuration button will be
available, allowing you to change the configuration of the attached printer. This
button will be grayed out if the printer does not support this option, or if the
printer is busy printing.
Configuration
Menu Equivalent: Main - Configure
This option allows you to configure the selected 802.11g Wireless Print Server
See the following section for details.
Wizard
This 802.11g Wireless Print Server Wizard allows you to do the basic
configuration for the selected device. The screens are similar to the Wizard run
from the CD-ROM, as described in Chapter 3.
Upgrade
Menu Equivalent: Main - Upgrade
This option allows you to upgrade the firmware for the selected 802.11g Wireless
Print Server. Before using this option, you need to obtain the .BIN file for the
firmware upgrade, and copy it to the same directory as BiAdmin.
Refresh
Menu Equivalent: Main - Refresh
Select this icon to update the 802.11g Wireless Print Server device listing after
changing the name or IP Address.
Exit
Menu Equivalent: Main - Exit
Exit the BiAdmin program. This does not save any changes you have made; you
must Save to Device on each screen.