User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 LAN Installation
- Chapter 3 Wireless Print Server Configuration
- Chapter 4 Client PC Configuration
- Chapter 5 BiAdmin Management Utility
- Chapter 6 Web-Based Management
- Chapter 7 Special Features
- Chapter 8 Troubleshooting
- Appendix A Specifications
- Appendix B Windows Server Configuration
- Appendix C Unix Systems
- Appendix D NetWare
Page 33
Wireless Tab
This tab will be available if the selected device has Wireless capability.
The screen will change according to the Security Mode selection, which has 3 options:
• Disabled – no data encryption is used.
• WEP – see below for details.
• WPA – see the following section for details.
WEP Encryption
If the Security Mode is set to WEP, the screen will look like the following example.
Figure 25: Wireless Screen
Change the settings to suit your environment. Generally, you must match the settings of other
'Wireless stations. The available settings are described below.
Selected Device
This shows the name of the Print Server.
SSID
• If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
• To communicate, all Wireless stations MUST use the same
SSID/ESSID. Change this value, or change the other Wireless
stations, to ensure each Wireless station has the same value.
• The default value is blank (null), so the Wireless station can join
any Ad-hoc group.
Note! The SSID is case sensitive.