User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 LAN Installation
- Chapter 3 Wireless Print Server Configuration
- Chapter 4 Client PC Configuration
- Chapter 5 BiAdmin Management Utility
- Chapter 6 Web-Based Management
- Chapter 7 Special Features
- Chapter 8 Troubleshooting
- Appendix A Specifications
- Appendix B Windows Server Configuration
- Appendix C Unix Systems
- Appendix D NetWare
Page 40
NetBEUI
Figure 29: NetBEUI Screen
Domain Name
Domain Name
Enter the designated work group to be serviced by the 802.11g
Wireless Print Server. This field is not case sensitive, so names with
different case will be considered to be the same name.
Options
Response Time
(0.1 secs)
Set how fast jobs are sent to the printer. The default value of zero
(0) delay should be increased only if your printer cannot cope with
no delays.
Abort Print Job if
Error
YES terminates a print job if a printing error occurs. NO (default)
will try to continue but may cause print errors. If print errors occur,
try setting this value to YES.
TCP/IP
Figure 30: TCP/IP Screen
IP Address
DHCP Client
Select this if your LAN has a DHCP Server.
The 802.11g Wireless Print Server will then automatically obtain an
IP address from the DHCP Server.