User's Manual
Table Of Contents
- Chapter 1Introduction
- Chapter 2LAN Installation
- Chapter 3Wireless Print Server Configuration
- Chapter 4Client PC Configuration
- Chapter 5BiAdmin Management Utility
- Chapter 6Web-Based Management
- Chapter 7Special Features
- Chapter 8Troubleshooting
- Appendix ASpecifications
- Appendix BWindows Server Configuration
- Appendix CUnix Systems
- Appendix DNetWare
Page 75
Example:
Marketing|RP1_PS123456:\
[T
AB] :lp=:\
[T
AB] :rm=PS_Rm203:\
[T
AB] :rp=L1:\
[T
AB] :sd=/usr/spool/Marketing:\
[T
AB] :mx#0:
Repeat this process for each Logical Printer/Print Queue combination that you wish to create.
Printing using LPD
For LPD printing instructions, refer to your UNIX manual. The following example is for a
BSD system:
lpr -P printer_name filename
Where:
printer_name is the name of the Print Queue defined on the Unix host.
filename is the name of the file you wish to print.
Example:
lpr -P Marketing /etc/hosts
In the above example, the /etc/hosts file is sent to the printer queue Marketing. It will then be
sent to the logical printer associated with this queue.