User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Basic Setup
- Chapter 3 Viewing Live Video
- Chapter 4 Advanced Viewing Setup
- Chapter 5 Web-based Management
- Introduction
- Connecting to Network Camera
- Welcome Screen
- Administration Menu
- System Screen
- Network Screen
- Wireless Screen (NC802APT and NC802A only)
- DDNS Screen
- Video Image Screen
- Video Access Screen
- User Database Screen
- Pan/Tilt Screen (NC802APT only)
- Motion Detection Screen
- E-Mail Alerts Screen
- Maintenance Screen
- Status Screen
- Log Screen
- Chapter 6 Windows Viewing/Recording Utility
- Chapter 7 Troubleshooting
- Appendix A Specifications
- Appendix B Streaming Video/Audio Solution
Motion Detection Screen
This screen is displayed when the Motion Detection option on the Administration menu is
clicked.
Figure 36: Motion Detection Screen
Data – Motion Detection Screen
Motion Detection
Motion Detection
Alerts can be sent when motion is detected. Select the desired
option:
• Disable - Motion detection alerts are disabled.
• Enable - Motion detection alerts are enabled during the
scheduled periods.
Note: If Motion Detection Alerts are enabled, you must enable and
configure either the E-mail or SMTP Server sections in order to
have an alert sent.
Pan/Tilt
Configuration
(NC802APT only)
This option is only available if your camera is fitted with a Pan/Tilt
control. If available, select the desired option to resolve conflict
between the Pan/Tilt and Motion Detection features.
48