User's Manual

x Select the desired Camera from the list on the left. The current settings for the selected
Camera will be displayed in the table on the right.
x Click Next to continue.
3. You will be prompted to enter the Administrator Name and Administrator Password, as
shown below.
x If using the default values, enter administrator for the name, and leave the
password blank.
x Otherwise, enter the Administrator Name and Administrator Password set on the
Admin Login screen.
Figure 4: Password Dialog
4. On the following IP Address Settings screen, shown below, choose Fixed IP or Dynamic
IP.
Figure 5: Fixed or Dynamic IP Selection
x Fixed IP is recommended, and can always be used.
x Dynamic IP can only be used if your LAN has a DCHP Server.
Click Next to continue.
5. If you chose Fixed IP Address, the following TCP/IP Settings screen will be displayed.
10