User's Manual

x Suitable for Home, Business or Public Facilities. Whether for Home, Business or
Public Facility surveillance, the Network Camera has the features you need.
x
Multi-Protocol Support. Supporting TCP/IP networking, SMTP (E-mail), HTTP and
other Internet related protocols, the Network Camera can be easily integrated into your
existing network.
x
Easy Configuration. A Windows-based Wizard is provided for initial setup.
Subsequent administration and management can be performed using a standard web
browser. The administrator can configure and manage the Network Camera via the LAN
or Internet.
x Viewing/Recording Utility. A user-friendly Windows utility is provided for viewing
live video. For periods when you are absent, or for scheduled recording, this application
also allows you to record video on your PC. Use the Playback function of the supplied
Windows utility to view the recorded files.
x Motion Detection. This feature can detect motion in the field of view. The Network
Camera will compare consecutive frames to detect changes caused by the movement of
large objects. Motion detection alarm can be triggered via e-mail, FTP, instant messaging
and/or an external alarm device.
x Flexible Scheduling. You can limit access to the video stream to specified times using
a flexible scheduling system. The Motion Detection feature can also have its own schedule,
so it is active only when required.
x
Syslog Support. If you have a Syslog Server, the Network Camera can send its log data
to your Syslog Server.
x
Audio Support. You can listen as well as look! Audio is encoded with the video if
desired. You can use either the built-in microphone or an external microphone.
x
IP Filter. Use the IP Filter to block/accept access to the IP addresses.
x
User-definable HTTP/ HTTPS port number. This allows Internet Gateways to use
"port mapping" so the Network Camera and a Web Server can share the same Internet IP
address.
x
DDNS Support. In order to view video over the Internet, users must know the Internet
IP address of the gateway used by the Network Camera. But if the Gateway has a dynamic
IP address, DDNS (Dynamic DNS) is required. Since many existing Gateways do not
support DDNS, this function is incorporated into the Network Camera.
x NTP (Network-Time-Protocol) Support. NTP allows the Network Camera to
calibrate its internal clock from an Internet Time-Server. This ensures that the time stamp
on Video from the Network Camera will be correct.
Security Features
x User Authentication. If desired, access to live video can be restricted to known users.
Users will have to enter their username and password before being able to view the video
stream. User authentication is not required if the Multicast feature is enabled.
x
Password-Protected Configuration. Configuration data can be password protected, so
that it only be changed by the Network Camera Administrator.
2