User's Manual

LAN port

Use a standard LAN cable to connect your Network Camera to a

10/100BaseT hub or switch.

Note:

x Attaching the LAN cable will disable the Wireless interface.

Only 1 interface can be active at any time.

x The LAN cable should only be connected or disconnected when

the camera is powered OFF. Attaching or detaching the LAN

cable while the camera is powered on does NOT switch the

interface between wired and wireless.

Power Input

Connect the supplied 12V power adapter here. Do not use other

power adapters; doing so may damage the camera.

GPIO

The GPIO terminal block includes 2 input ports and 2 output ports.

MIC In

If required, an external microphone can be attached here. Attaching

a microphone here will disable the built-in microphone on the front.

Microphones which are designed to be used with PCs are usually

compatible with this microphone input.

SPKR out

If required, an external speaker can be attached here.