User's Manual

Chapter 2

Initial Installation

This Chapter covers the software installation of the device.

Procedure

1. Power Up

Connect the supplied power adapter to the UE Tester. Use only the power adapter pro-

vided. Using a different one may cause hardware damage.

2. Connect LAN Cable

Use a standard LAN cable to connect the device to the Ethernet port on the UE Tester

3. Check the LESs

The Power LED should be ON.

WAN1, WAN2 LED should be ON

Band 4/Band 13/Band 2/Band5 should be ON depend on the UE test case scenario