User's Manual

Page 15
Figure 3: Wireless Configuration
Regulatory
Domain
It is illegal to use this device in any location outside of the regulatory
domain.
Station Name The name used to identify this Wireless station.
SSID
• If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
• To communicate, all Wireless stations MUST use the same
SSID/ESSID. Change this value, or change the other Wireless
stations, to ensure each Wireless station has the same value.
• The default value is wireless.
Note! The SSID is case sensitive.
Channel No By using "Infrastructure" mode, the Channel is selected
automatically, to match the Channel used by the Access Point.
Encryption
WEP Disabled/
Enabled
If Disabled (default), data is NOT encrypted before being
transmitted.
If Enabled, you must provide either the 64 Bit key table or the 128
Bit keys, as described below. The key is used to encrypt the data
before transmission.