User's Manual
Table Of Contents
- Title page
- Legal notice
- Contents
- List of figures
- About this document
- 1 Safety and general information
- 2 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 installation
- 3 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 commissioning
- 4 Post-installation activities
- Appendix A: Product conformance statements
- Glossary
- Index
To mount the device onto a wall, perform the following steps:
...................................................................................................................................................................................................
1
At the selected installation location, mark the points on the flat surface for the four (4)
fixing holes, using the holes in the mounting plate as a guide.
Check the horizontal position with a spirit level.
...................................................................................................................................................................................................
2
Drill holes at the marked points, and insert wall plugs into the fixing holes.
...................................................................................................................................................................................................
3
Attach the mounting plate to the wall using appropriate screw fixings.
Note: Depending on the wall the device must be mounted to, different screw fixings
might be needed. After site survey, these mounting accessories must be procured
locally.
...................................................................................................................................................................................................
4
Connect the cables.
...................................................................................................................................................................................................
5
Attach the 9962 MSEC v1.0 to the mounting plate as follows:
1. Line up the four grooves in the back of the 9962 MSEC v1.0 with the four notches
protruding from the mounting plate.
The following graphic shows the notches and the lock location on the mounting plate and
the grooves in the back of the 9962 MSEC v1.0:
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
installation
Mounting guidelines
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA LR14 SCM
Issue 0.02 January 2015
2-7
D
RAFT
D
RAFT