User's Manual

Power supply and backhaul options
The 9962 MSEC v1.0 access point can be powered through:
• DC input power with an AC-DC power adapter including an appropriate Jack,
• or 4p PoE compliant with PoH standard (following IEEE 802.3 at Power over
Ethernet standard).
If PoE compliant with PoH standard is used to supply the power then a PoE injector
or a PoE capable router can be used.
Data cables
Each 9962 MSEC v1.0 access point requires at least one data cable to connect the
backhaul. In case of daisy chain, an additional data cable is required (refer to
“Daisy
chain” (p. 2-13)
).
The data cable can be a standard Ethernet cable with RJ45 connector or a fiber cable with
an optical transceiver.
Before you begin
Ensure the 9962 MSEC v1.0 access point has been correctly installed.
Connect the 9962 MSEC v1.0 cables
...................................................................................................................................................................................................
1
According to the configuration on site, select the appropriate option in the following
table, and perform the associated procedure:
If you want to... Then ...
Use an AC-DC power adaptor and a standard
router,
Go to
“Connect to a standard DSL router”
(p. 2-11)
and “Connect the AC-DC power
adapter” (p. 2-12)
Use PoE supplied by a DSL router with PoE
function,
Go to “Connect to a DSL router with PoE
function” (p. 2-12)
Connect to a standard DSL router
To connect the 9962 MSEC v1.0 to a standard DSL router using an Ethernet cable
through which power is not supplied, perform the following steps:
...................................................................................................................................................................................................
1
Route the Ethernet cable from the 9962 MSEC v1.0 to a standard DSL router.
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
installation
Cabling
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA LR14 SCM
Issue 0.02 January 2015
2-11
D
RAFT
D
RAFT
E ND OF STEPS
...................................................................................................................................................................................................