User's Manual
Table Of Contents
- Title page
- Legal notice
- Contents
- List of tables
- 9962 MSEC Maximum Key Hardward Performances (based on Software used)
- Frequency bands
- Transmit Power
- Radio Parameters
- Power LED initialization
- Power LED fault indication
- Faults that set the Power LED hardware failure
- LTE LED startup
- LTE LED fault conditions
- WCDMA LED startup
- WCDMA LED fault condition
- GPS LED
- GPS LED fault condition
- WiFi Status LED initialization states
- List of figures
- About this document
- 1 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Overview
- 2 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Functional Description
- 3 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Hardware
- 4 Troubleshooting using the LED states
- Index
Integrated omni-directional antennas and optional external antennas are used to extend
coverage, add capacity and improve end-user experience in small, medium and large
indoor environments in a secure, cost effective and easily deployable manner.
Note: Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Product Capabilities
The 9962 MSEC has sophisticated capabilities developed by Bell Labs to ensure
zero-touch configuration in the case of a single deployment.
The 9962 MSEC has several unique capabilities:
• Designed to blend into most business, office, or warehouse environments.
• It has 2 simultaneous carriers: one LTE and one W-CDMA, or 2 LTE carriers with
Carrier Aggregation;
• It has a capacity up to 64 LTE and 32 W-CDMA active simultaneous users (128 users
in LTE only mode);
• Ithas2x2MIMO configuration with transmit and receive diversity for LTE, and 1 x
2 receive diversity for W-CDMA;
• It uses a single cable for power with 4p PoE (Power over HD Base-T) and backhaul;
• It has a common backhaul across 3G/4G/Wi-Fi via one RJ45 and one SFP Port.
It has 7 integrated omni-directional antennas and 2 attached dipole antennas :
• 4 antennas are dedicated to RAN access, one is used for sniffing RAN frequency
bands, 4 are dedicated to WiFi
• The Multi-Standard Enterprise Cell can support a set of external antennas.
• The internal or external antenna configuration is performed during hardware
installation (and is reversible).
• The two configurations allow flexible installation and indoor coverage optimization.
For specific solutions, the customer may use their own antennas (directional,
omni-directional) but must ensure that the necessary certifications are valid.
The 9962 Multi-Standard Enterprise Cell has also Wi-Fi capabilities:
• The Wi-Fi version module is Wi-Fi Certified™ ;
• IEEE 802.11n with dual-band dual-concurrent communication;
• Integrated antennas optimized for 2x2 MIMO, and up to 125/100 mW Tx power per
path;
• 20/40 MHz bandwidth
• Maximum physical data throughput of 2x300Mbps;
• Supports up to 256 connected users;
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 :
Overview
9962 MSEC v1.0 : Product Overview
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0003-DEZZA
Issue 3 November 2015
1-3