User's Manual
Table Of Contents
- Title page
- Legal notice
- Contents
- List of tables
- 9962 MSEC Maximum Key Hardward Performances (based on Software used)
- Frequency bands
- Transmit Power
- Radio Parameters
- Power LED initialization
- Power LED fault indication
- Faults that set the Power LED hardware failure
- LTE LED startup
- LTE LED fault conditions
- WCDMA LED startup
- WCDMA LED fault condition
- GPS LED
- GPS LED fault condition
- WiFi Status LED initialization states
- List of figures
- About this document
- 1 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Overview
- 2 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Functional Description
- 3 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Hardware
- 4 Troubleshooting using the LED states
- Index
Ancillary items
In addition to the standard delivered parts, the following ancillary items may be required.
They may be purchased separately from Alcatel-Lucent, or purchased locally :
• two RF stick antennas for use in wall-mounted installation,
• SFP transceiver,
• Ethernet and/or fiber cable,
• 4p PoE compliant with PoH standard adapter,
• AC to DC power adapter,
• Lock,
• RF antenna jumper,
• GPS extension cable.
Connectors and Interfaces
The following connectors and interfaces are part of the 9962 MSEC solution :
• 1 Gigabit Ethernet connector (1000Base-T RJ-45) for backhauling or daisy-chaining.
If 4p PoE is used to supply the power, this connector is to be connected to a 4p PoE
capable router or a 4p PoE injector when the DC power connector is not used.
• 1 SFP interface for backhauling or daisy-chaining which supports a 1000base-X GbE
optical transceiver or 100/1000Base-T electrical transceiver
• Jack connector for power supply. When the AC/DC power adaptor is used to supply
the power, the PoE capable router is not used
• 1 SMA-type connector for the GPS antenna
• 9 SMA-type connectors for the external antenna version
• A lock slot
• 6 bi-color LEDs to provide the status of the unit
• A re-set button
Figure 3-3 Power and Input/Output Ports
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 :
Hardware
9962 MSEC : Hardware Description
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-4
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0003-DEZZA
Issue 3 November 2015