User's Manual

Technical Requirements
Power Supply
The power supply requirements and consumption are as follows :
• If a Power supply over 4p PoE is used to supply the power, a 4p PoE injector can be
used while the AC/DC power connector is not used. Otherwise, a 4p PoE capable
router can also be used. 4p PoE capable router and 4p PoE injector are not part of the
standard product delivery.
• Power supply with AC/DC power adaptor : The Multi-standard Enterprise Cell v1
requires a 48V DC power feed. In this case, power injector is not used but a AC/DC
power adaptor is needed.
• Power consumption : The maximum power consumption of the Enterprise Cell
depends on the transmit power.
The power consumption on the 250 mW variant is approximately 48 W.
Frequency Bands
The Alcatel-Lucent Enterprise Cell Multi-Standard supports 5, 10, 15 and 20 MHz carrier
bandwidths for LTE and 5 MHz carrier bandwidth for W-CDMA applications.
Supported band and frequencies are provided in the table below:
Table 3-1 Frequency bands
Operating
Band for LTE
Frequency
Band
Common
Name
UL
Frequencies
DL
Frequencies
II 1900 PCS 1850 – 1910
MHz
1930 – 1990
MHz
IV 1700 AWS 1710 – 1755
MHz
2110 – 2155
MHz
XII 700 LMSH A/B/C 699 – 716 MHz 729 – 746 MHz
Operating
Band for UMTS
Operation
Frequency
Band
Common
Name
UL
Frequencies
DL
Frequencies
II 1900 PCS 1850 – 1910
MHz
1930 – 1990
MHz
V 850 CLR 824 - 849 MHz 869 - 894 MHz
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 :
Hardware
Technical Requirements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-8
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0003-DEZZA
Issue 3 November 2015