User's Manual

Table 3-2 Transmit Power (continued)
Radio Access
Technology
W-CDMA, LTE W-CDMA, LTE WiFi
Max conducted
power per chain
(dBm):
23 24 FCC : 19
ETSI : 11
FCC:18
ETSI : 18
Typical Max
EIRP (dBm) per
band:
Depending on antenna gain FCC : 28
ETSI : 20
FCC:26
ETSI : 26
Radio Parameters
The Enterprise Cell Multi-Standard is designed according to the following parameters in
3GPP TS 25.104 and 3GPP TS 36.104 specifications.
Table 3-3 Radio Parameters
Parameter W-CDMA Value 3GPP 25.104
requirement
LTE Value 3GPP 36.104
requirement
Sensitivity : -116.5 dBm - 107 dBm (or
less)
-94.5 -93.5
QPSK EVM 17.5% 17.5% (or less) 17.5% 17.5%
16QAM EVM 12.5% 12.5% (or less) 12.5% 12.5%
64QAM EVM 7% - 7% 8%
ACLR 5MHz 45 dB 45 dB (or
greater)
45 dB 45 dB
ACLR 10MHz 50 dB 50 dB (or
greater)
45 dB 45 dB
Reliability
The MTBF (Mean Time Between Failures) is calculated based on Telcordia SR-332 Issue
2, September 2006.
The MTBF of the Enterprise Cell Multi-Standard v1.0 at 25°C on a stand position is
356,000 hours.
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 :
Hardware
Technical Requirements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-10
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0003-DEZZA
Issue 3 November 2015