User's Manual
Table Of Contents
- Title page
- Legal notice
- Contents
- List of tables
- 9962 MSEC Maximum Key Hardward Performances (based on Software used)
- Frequency bands
- Transmit Power
- Radio Parameters
- Power LED initialization
- Power LED fault indication
- Faults that set the Power LED hardware failure
- LTE LED startup
- LTE LED fault conditions
- WCDMA LED startup
- WCDMA LED fault condition
- GPS LED
- GPS LED fault condition
- WiFi Status LED initialization states
- List of figures
- About this document
- 1 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Overview
- 2 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Functional Description
- 3 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Hardware
- 4 Troubleshooting using the LED states
- Index
Status Indicators
Six bi-color LEDs provide indication for the system:
• Power
• LTE
• W-CDMA
• GPS status
• 2 rear LEDs indicate Wi-Fi status, labelled 2G and 5G
When the system is fully working for 15 minutes, the LEDs are extinguished.
Assuming the service functions normally, the system status LED color is green. In
addition, it is possible to monitor different status elements following a LED sequence
described later in this user guide, in the chapter on Troubleshooting.
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 :
Hardware
Technical Requirements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0003-DEZZA
Issue 3 November 2015
3-11