User's Manual
Table Of Contents
- Title page
- Legal notice
- Contents
- List of tables
- 9962 MSEC Maximum Key Hardward Performances (based on Software used)
- Frequency bands
- Transmit Power
- Radio Parameters
- Power LED initialization
- Power LED fault indication
- Faults that set the Power LED hardware failure
- LTE LED startup
- LTE LED fault conditions
- WCDMA LED startup
- WCDMA LED fault condition
- GPS LED
- GPS LED fault condition
- WiFi Status LED initialization states
- List of figures
- About this document
- 1 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Overview
- 2 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Functional Description
- 3 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 : Hardware
- 4 Troubleshooting using the LED states
- Index
WCDMA LED
The WCDMA start-up sequence and fault state are indicated by a single bicolored
red/green LED.
Table 4-6 WCDMA LED startup
State LED state Description
Power off OFF Power off
Booting and
BLST
Red Power on or restart
System
initializing
(timing, RF,
cell) and begin
location check
Toggling
red/green
Establishing resources needed by the LTE cell. The 9962
MSEC v1.0 may leave this state before location check
completes if
passiveGPS
is True.
Otherwise it remains in this state until the location check
completes.
Location failure flashing red The 9962 MSEC v1.0 remains in this state if location
check or movement check fails and
showLocationCheck
is True
Unit reset is required to clear this state.
Cell unlocked
and ready for
service (LTE cell
AST Unlocked
and OST
Enabled)
Green Location check may be running in the background or no
location check to be performed
In the case where a fault is detected, the LED indicates the fault.
Table 4-7 WCDMA LED fault condition
LED state Description Comment
flashing green Cell blocked.
LTE cell AST is set to
Locked, or OST is
Disabled due to ongoing
Network Listen activity
Cell successfully configured but not
transmitting
The LED fault state clears when the cell is
unlocked or Network Listen completes and
OST is now Enabled.
Troubleshooting using the LED states LED states for the 3G and 3G/4G 9962 MSEC v1.0
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-6
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0003-DEZZA
Issue 3 November 2015