User's Manual
Table Of Contents
- Title page
- Legal notice
- Contents
- List of tables
- List of figures
- Multi-standard Enterprise Cell v1 antennas
- 9962 MSEC v1.0 mounting plate
- 9962 MSEC v1.0 stick antennas
- Notch, groove and lock locations
- Mounting plate on the 9962 MSEC v1.0 access point
- 9962 MSEC v1.0 integrated antennas
- 9962 MSEC v1.0 external antenna connector
- 9962 MSEC v1.0 integrated antennas
- 9363 access point replacement
- Backhaul connection - Star configuration - 2 options
- 9962 MSEC v1.0 connectors
- Example of 9962 MSEC v1.0 daisy chain
- 9962 MSEC v1.0 front LEDs
- 9962 MSEC v1.0 Wi-Fi LEDs
- About this document
- 1 Safety and general information
- 2 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 installation
- 3 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 commissioning
- 4 Post-installation activities
- Appendix A: Product conformance statements
- Glossary
- Index
WARNING
Inhalation hazard
Inhalation of asbestos fibers can result in serious illness or death.
Buildings constructed before 1980 MAY contain asbestos. Buildings constructed before
1970 OFTEN contain asbestos. Potential exposure could occur during routing of cable or
wires, removing cables, removing transite or asbestos cement boards, drilling wallboard,
transite panels, or floor tiles, removing sprayed-on fireproofing, moving or removing
ceiling tiles, installing cable hangers.
Do not disturb asbestos. If asbestos is present, ensure potential expose is controlled by
adhering to local asbestos management regulations and follow safe work practices.
NOTICE
Service-disruption hazard
Condensation can occur in the network element during transport, especially on moving
from outside to closed rooms. Condensation can cause malfunctioning of the circuit
packs.
Ensure that circuit packs and shelves have reached room temperature and are dry before
taking them into operation.
NOTICE
Service-disruption hazard
Tools left in the work area can cause short circuits during operation which can lead to the
destruction of units.
Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,
have been left in or on the equipment.
CAUTION
Lifting hazard
Lifting this equipment by yourself can result in injury due to the size and weight of the
equipment.
Always use three people or a lifting device to transport and position this equipment.
Safety and general information General hazard statements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01 September 2015
1-5
P
RELIMINARY
P
RELIMINARY