User's Manual
Table Of Contents
- Title page
- Legal notice
- Contents
- List of tables
- List of figures
- Multi-standard Enterprise Cell v1 antennas
- 9962 MSEC v1.0 mounting plate
- 9962 MSEC v1.0 stick antennas
- Notch, groove and lock locations
- Mounting plate on the 9962 MSEC v1.0 access point
- 9962 MSEC v1.0 integrated antennas
- 9962 MSEC v1.0 external antenna connector
- 9962 MSEC v1.0 integrated antennas
- 9363 access point replacement
- Backhaul connection - Star configuration - 2 options
- 9962 MSEC v1.0 connectors
- Example of 9962 MSEC v1.0 daisy chain
- 9962 MSEC v1.0 front LEDs
- 9962 MSEC v1.0 Wi-Fi LEDs
- About this document
- 1 Safety and general information
- 2 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 installation
- 3 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 commissioning
- 4 Post-installation activities
- Appendix A: Product conformance statements
- Glossary
- Index
...................................................................................................................................................................................................
2
At the selected installation location, mark the points on the flat surface for the four (4)
fixing holes, using the holes in the mounting plate as a guide.
Check the horizontal position with a spirit level.
...................................................................................................................................................................................................
3
Drill holes at the marked points, and insert wall plugs into the fixing holes.
...................................................................................................................................................................................................
4
Attach the mounting plate to the wall using appropriate screw fixings.
Note: Depending on the wall the device must be mounted to, different screw fixings
might be needed. After site survey, these mounting accessories must be procured
locally.
...................................................................................................................................................................................................
5
Connect the cables. Refer to the procedure “Cabling” (p. 2-19) for details.
...................................................................................................................................................................................................
6
Attach the 9962 MSEC v1.0 to the mounting plate as follows:
1. Line up the four (4) grooves in the back of the 9962 MSEC v1.0 with the four (4)
notches protruding from the mounting plate.
The following graphic shows the notches and the lock location on the mounting plate and
the grooves in the back of the 9962 MSEC v1.0:
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
installation
Mounting guidelines
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-10
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01 September 2015
P
RELIMINARY
P
RELIMINARY