User's Manual

ManualsBrandsSercomm ManualsElectronics9962 Multi-Standard AP Metro Cell Indoor

Table Of Contents

External antennas connections

The ceiling installation requires external antennas that have to be linked to the 9962

MSEC v1.0 access point with the appropriate jumper cables on the antenna SMA

connectors.

The table lists the jumper cables complying with the 9962 MSEC v1.0 antennas

connectors:

Order codes Description

1AB414660001 Jumper Type N to SMA (1m – SMA Male / N

Female)

1AB425160001 Jumper Type N to SMA (1m – SMA Male / N

Male)

1AB414570001 Jumper Type N to SMA (2m – SMA Male / N

Male)

Power supply

The 9962 MSEC v1.0 access point can be powered through:

• DC input power with an AC-DC power adapter including an appropriate Jack,

• or 4p PoE compliant with PoH standard (following IEEE 802.3 at Power over

Ethernet standard).

If PoE compliant with PoH standard is used to supply the power then a PoE injector

or a PoE capable router can be used.

Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1

installation

Cabling

....................................................................................................................................................................................................................................

2-24

Alcatel-Lucent 9962 MSEC v1.0

3MN-02001-0002-RJZZA

Issue 2.01 September 2015

RELIMINARY